>> Taking this one step at a time,the heater fan issue could be a fault with
>> the fan speed resistor.This is a fairly cheap fix
Argh, the whole thing was only £350! It's 14 years old, but seems remarkably good (so far, touch wood).
>> Smell from the heater when on hot could be the matrix leaking.
Where might it leak *to*? I see no evidence of loss of fluid fron the radiator top-up thingy.
>> Lastly,the a/c fault could require a re-gas ,but I would be very surprised if this
>> was not the only issue.
Same here. If there's positive pressure, maybe, but... but.
>> Yes ,the black plastic dust covers are the access ports for the a/c sytem.hth
If I undo this, is fluid likely to spurt out, or is there something I can press inside that will give an indication that there's +ve pressure (i.e. by making a drop of gas spurt out under pressure)?
TYVM for your reply.
|