When I first got this, the clutch pedal was grabby. As it was released the pedal would only come up in 5mm steps. So I put on a new clutch cable and everything was rosy.
Then after a few weeks it returned. So I added some light oil to the pedal pivot and the problem was solved again. But once again it returned, so this time I took the pivot out, inspected it, added some light grease, as well as to the 'ball joint' on the end of the cable, and re-installed. This time it solved the problem for about a day.
So what's the verdict from all you knowledgable one? Is it the clutch release bearing not sliding smoothly on the input shaft?
|