Technical Car/Motor Issues > Hyundai i10 - 12 1.0 Brake master cylinder problem
Thread Author: percy Replies: 9
View Flat 

New Wed 20 Feb 19 21:49 
 Hyundai i10 - 12 1.0 Brake master cylinder problem - slowdown avenue
I also replaced mc from a breaker , I used the original cap to fit with my pressure bleeder , with success. but still had sticking brakes. after replacing hose it was fine. to any body coming here in years to come.i would suggest bleed and rebleed the brakes before opening the hydraulics, take a good look at the pad wear too
<< Prev |
Reply to this message | Report message
       
 Messages Author Date
 Hyundai i10 - 12 1.0 Brake master cylinde.. new percy 15 Feb 19 14:41
 Hyundai i10 - 12 1.0 Brake master cylind.. new carmalade 15 Feb 19 15:23
 Hyundai i10 - 12 1.0 Brake master cylin.. new percy 15 Feb 19 16:47
 Hyundai i10 - 12 1.0 Brake master cyli.. new carmalade 15 Feb 19 18:08
 Hyundai i10 - 12 1.0 Brake master cyli.. new VxFan 16 Feb 19 20:05
 Hyundai i10 - 12 1.0 Brake master cylind.. new slowdown avenue 15 Feb 19 20:47
 Hyundai i10 - 12 1.0 Brake master cylin.. new percy 16 Feb 19 15:39
 Hyundai i10 - 12 1.0 Brake master cyli.. new slowdown avenue 16 Feb 19 18:44
 Hyundai i10 - 12 1.0 Brake master cyl.. new percy 20 Feb 19 19:15
 Hyundai i10 - 12 1.0 Brake maste.. new slowdown avenue 20 Feb 19 21:49
Latest Forum Posts